Windows: Ensure the switch in the “OFF”, connect the recorder to a computer, enter the “USB DISK” – “Set time”, run the “SetDigitRecorderTm.exe”, click the “set time”, So the time of the recorder is synchronized with a computer. Device setting up Voice activation (Vor)Įnsure the switch in the “OFF”, connects the recorder to a computer, enter the “USB DISK”, run the “RECSET.TXT”, change the number after VOR to what you want and save, 0 means turn off, 1-7 means turn on, the smaller the number, the higher of the activation sensitivity, recommend 1~3.Įnsure the switch in the “OFF”, connects the recorder to the computer, enter the “USB DISK”, run the “RECSET.txt”, change the number after “Gain” to what you want and save, the larger the number, the higher the sensitivity of the recording. When the blue light is on, it means the battery is fully charged. ![]() ![]() The indicator light flashes red when charging, and the charging time is generally about 5 hours to fully charge. Insert one end of the USB cable into the USB port of the recorder, and the other end into the USB port of the charger. With headphone: Toggle the switch to “OFF”, then inserts the headphone, toggle the switch to “ON”, press the play button to play the audio in the recorder.Įnsure the switch in the “OFF”, connects the recorder to the computer by data cable, a moment later, the computer will recognize it, find “USB DISK”, enter the “RECORD” folder, select files for management. Note: The GROOVE player that comes with Windows 10 does not support WAV format playback, please refer to the following method to use othermusic players. If the player on your computer does not play the wav files, please download another player, such as Windows Media Player. Tips: The recording file format is “WAV”. With computer: Use the data cable to connect the recorder to the computer, open the “USB DISK” and enter “RECORD”, select the file you want to play. In the recording or playback, toggle the switch to the “OFF ” (the purple light flashes once and turns off) to save the recording and shut down. Tips: When recording, it is recommended keeping a distance of more than 10 feet from the microphone to avoid blasting sound. Toggle the switch to the “ON” to turn on the recorder and start to recording (the indicator light turns from purple light to red light and flashes 3 times) When the headphone is not plugged in, and the switch was on the “OFF”. ![]() Fast forward / fast rewind: use headphones to play MP3 / recording files in the process, long press fast forward / fast rewind process, the blue light flashes rapidly.Charging: When charging, the red indicator flashes, when full-charged, the blue light is always on.Low power: the red Indicator flashes quickly for about 10 seconds and then automatically shut down.Standby: the blue indicator is always on. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |